John Deere 625D Draper for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

CroppedImage525300-JohnDeere-625D.jpg

625D Draper

 

Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
Manufacturer John Deere
Model 625D
Cutterbar  
Type  Straight line knife drive system  
Length  7.8 m (25.5 ft)
Knife drive  Base single, optional dual knife (combine use only)  
   Base dual knife (SPW only or SPW/combine combination use)  
Knife speed  520 cycles/min (1,040 spm)
Cutterbar tilt  Base Hydraulic, 9 degrees tilt maximum  
Pickup reel  
Number of slats  6 bat poly base  
   8 bat steel optional (for forage conditions)  
Fingers  Nylon (steel optional, typically used in rice or forage conditions)  
Diameter  1,067 mm (42 in.)
   For rice or forage conditions 1,371 mm (54 in.)
Height control  Hydraulic  
Speed control  Hydraulic  
Reel lift  Cylinder stroke 330 mm (13 in.)
   Total range 391.5 mm (15.4 in.)
Reel fore and aft  Cylinder stroke 359 mm (14.1 in.)
   Total range 620 mm  (24.4 in.)
Reel resume  Base  
Reel reverse  Base  
Operating speeds  6-54 rpm 
Operating speeds (54-in. reel)  5-44 rpm 
Slat reel  
Number of slats  ---  
Diameter  ---  
Height control  ---  
Speed control  ---  
Operating speeds  ---  
Draper belts  
Width  0.7 L (24 oz) rubber coated polyester with V-Guide tracking:  
   Side belts 1,016 mm (40in.)
   Center belts 1,397 mm  (55 in.)
   Center belt not included with SPW configuration  
Clean height  25.4 mm (1 in.)
Operating speed  Side belts: variable up to 223 m/min (735 fpm)
   Center belts: 212 m/min (695 fpm)
   Center belt not included with SPW configuration  
Speed control  Hydraulic from cab  
Center belt reverse  Base; Center belt not included with SPW configuration  
Feed drum  
Diameter  406 mm (16 in.)
   Feed drum not included with SPW configuration  
Feed drum fingers  Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer  
Number of fingers  18  
Auger finger platform  Dual chevron, retracting  
Finger reach  152 mm (6 in.)
Drum/auger reverse  Base  
Operating speed  195 rpm 
Center clean out door  Base  
Header height sensing  
Type  Electro-hydraulic base  
Header height sensing on the ground  Base  
Header height sensing off the ground  ---  
Auxiliary top auger  
Type  Optional hydraulic drive  
Dimensions  
Platform length  8.5 m (27.9 ft)
Overall operating depth  2.4 m (7.9 ft)
Transport width, field position  8.1 m (26.5 ft)
Transport width on wheel, less dividers  ---  
Transport length, hitch extended  ---  
Weight  
Approximate weight (slat reel)  ---  
Approximate weight (pickup reel)  Combine only 2,884 kg (6,359 lb)
   SPW only 2,284 kg (5,036 lb)
Approximate weight (with transport)  ---  
Approximate weight (optional 54-in. reel)  Combine only 2,974 kg (6,556 lb)
   SPW only 2,374 kg (5,234 lb)