Double tap to zoom

 

Features

  • Windrowing capability with 600D Drapers
  • Dual-knife drive system is timed
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor

Specifications

MODEL John Deere 630D Draper
CUTTERBAR  
Type Straight line knife drive system
Length 30.5 ft (9.3 m)
Knife drive Dual knife base, single optional (for combine use only)
Knife speed 490 cycles/min
Cutterbar tilt Base hydraulic, 9 degrees tilt maximum
PICKUP REEL  
Number of slats 6 bat poly base, 6 bat steel optional
Fingers Nylon base, steel optional
Diameter 42 in. (1,067 mm)
Height control Hydraulic
Speed control Hydraulic
Reel lift Cylinder stroke 13 in. (330 mm); Total Range 15.4 in. (391.5 mm)
Reel fore and aft Cylinder stroke 14.1 in. (359 mm); Total range 24.4 in. (620 mm)
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Operating speeds (54-in. reel)  
SLAT REEL  
Number of slats  
Diameter  
Height control  
Speed control  
Operating speeds  
DRAPER BELTS  
Width Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration
Clean height 1 in. (25.4 mm)
Operating speed Side belts: variable up to 223 m/min (735 fpm); Center belts: 212 m/min (695 fpm); Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration
FEED DRUM  
Diameter 16 in. (406 mm); Feed drum not included with SPW configuration
Feed drum fingers Heavy duty round 0.625 in. (16 mm) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 6 in. (195 mm)
Drum/auger reverse Base
Operating speed 195 rpm
Center clean out door Base
HEADER HEIGHT SENSING  
Type Electro-hydraulic base
Header height sensing on the ground Base
Header height sensing off the ground Base
AUXILIARY TOP AUGER  
Type Optional hydraulic drive
DIMENSIONS  
Platform length 32.9 ft (10.0 m)
Overall operating depth 8.2 ft (2.5 m)
Transport width, field position 32.5 ft (9.9 m)
Transport width on wheel, less dividers 8.9 ft (2.7 m)
Transport length, hitch extended 40.4 ft (12.3 m)
WEIGHT  
Approximate weight (slat reel)  
Approximate weight (pickup reel) Combine only 6,855 lb (3,109 kg); SPW only 5,532 lb (2,509 kg)
Approximate weight (with transport) Combine only 7,245 lb (3,286 kg); SPW only 5,922 lb (2,686 kg)
Approximate weight (optional 54-in. reel)  
ADDITIONAL INFORMATION  
Date collected