Double tap to zoom

 

Features

Reel resume and reverse are features on the 700D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, or leaning crops.

Takes one person a few minutes to convert draper from field to transport without use of tools.

All John Deere 700D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars have knifeback reinforcement straps to strengthen the knifeback.

A draper feeding option is available for model year 2018 that will be offered for the full 700D Rigid Draper lineup. This option code will include larger top crop augers with the necessary hydraulic components and mounting hardware as well as an improved seal kit to keep the grain in the draper and not left on the ground.

The center feed drum is designed for efficient, consistent feeding of the crop into the combine feederhouse. A feature for 700D Draper Platforms is a feed drum retractable auger finger to improve crop feeding at the corners of the feed drum.

Specifications

CUTTERBAR  
Type Straight line knife drive system
Length 25.5 ft (7.8 m)
Knife drive Base single, optional dual knife (combine use only)Base dual knife (SPW only or SPW/combine combination use)
Knife speed 1,040 spm (490 cycles/min )
Cutterbar tilt Base Hydraulic, 9 degrees tilt maximum
PICKUP REEL  
Number of slats 6 bat poly base; 8 bat steel optional (for forage conditions)
Fingers Nylon (steel optional, typically used in rice or forage conditions)
Diameter 42 in. (1,067 mm); For rice or forage conditions 54 in. (1,371 mm)
Height control Hydraulic
Speed control Hydraulic
Reel lift Cylinder stroke 13 in. (330 mm) Total range 15.4 in. (391.5 mm)
Reel fore and aft Cylinder stroke 14.1 in. (359 mm) Total range 24.4 in. (620 mm)
Reel resume Base
Reel reverse Base
Operating speeds 6-54 rpm
Operating speeds (54-in. reel) 5-44 rpm
SLAT REEL  
Number of slats ---
Diameter ---
Height control ---
Speed control ---
Operating speeds ---
DRAPER BELTS  
Width 24 oz (0.7 L) rubber coated polyester with V-Guide tracking; Side belts 40 in. (1,016 mm); Center belts 55 in. (1,397 mm); Center belt not included with SPW configuration
Clean height 1 in. (25.4 mm)
Operating speed Side belts: variable up to 223 m/min (735 fpm); Center belts: 212 m/min (695 fpm); Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration
FEED DRUM  
Diameter 16 in. (406 mm) Feed drum not included with SPW configuration
Feed drum fingers Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, retracting
Finger reach 6 in. (152 mm)
Drum/auger reverse Base
Operating speed 195 rpm
Center clean out door Base
HEADER HEIGHT SENSING  
Type Electro-hydraulic base
Header height sensing on the ground Base
Header height sensing off the ground ---
AUXILIARY TOP AUGER  
Type Optional hydraulic drive
DIMENSIONS  
Platform length 27.9 ft (8.5 m)
Overall operating depth 7.9 ft (2.4m)
Transport width, field position 26.5 ft (8.1 m)
Transport width on wheel, less dividers ---
Transport length, hitch extended ---
WEIGHT  
Approximate weight (slat reel) ---
Approximate weight (pickup reel) Combine only 6,359 lb (2,884 kg); SPW only 5,036 lb (2,284 kg)
Approximate weight (with transport) ---
Approximate weight (optional 54-in. reel) Combine only 6,556 lb (2,974 kg): SPW only 5,234 lb (2,374 kg)
ADDITIONAL INFORMATION  
Date collected ---