John Deere 625D for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

CroppedImage525300-625Ddraper.jpg

625D

 

Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

 

The 625D Draper Platform increases combine productivity in small-grain and rice harvests.

  • The draper belt system ensures smooth, uniform feeding of crop to the feed drum and the combine feederhouse.
  • Ideal for harvesting crops where additional cutting platform productivity is desired.

The 625D has a true 25-ft cutting width, and the unique draper-style crop cutting system delivers the high-capacity feeding required of the high-capacity S-Series Combines.

Model 625D
Cutterbar  
Type Straight line knife drive system
Length, ft. (m) 25.5-ft (7.77m)
Knife drive Base single; Optional Dual Knife (Combine use only); Base Dual Knife (SPW only or SPW/Combine combination use)
Knife speed 520 cycles/min (1040 strokes/min)
Cutterbar tilt Base Hydraulic (9 degrees tilt max)
Pickup Reel  
Number of slats 6 bat poly base; 8 bat steel optional (for forage conditions)
Fingers Nylon (steel optional typically used in rice or forage conditions)
Diameter, in. (mm) 42-in (1067mm); 54-in (1371mm) for rice or forage conditions
Height control Hydraulic
Speed control Hydraulic
Reel lift, in. (mm) 13.0-in (330mm) Cylinder stroke; 15.4-in (391.5 mm) Total Range
Reel fore and aft, in. (mm) 14.1-in (359mm) Cylinder stroke; 24.4-in (620mm) Total Range
Reel resume Base
Reel reverse Base
Operating speeds, rpm 6-54 rpm
Operating speeds, rpm (54-in. reel) 5-44 rpm
Slat Reel  
Number of slats ---
Diameter, in. (mm) ---
Height control ---
Speed control ---
Operating speeds, rpm ---
Draper Belts  
Width, in. (mm) 24-oz rubber coated polyester with V-Guide tracking; Side belts 40-in (1016mm); Center belts 55-in (1397mm); Center belt not included with SPW configuration
Clean height, in. (mm) 1-in (25.4mm)
Operating speed, ft./min. (m/min.) Side belts: Variable up to 735-ft/min (223m/min); Center belts: 695-ft/min (212m/min); Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration
Feed Drum  
Diameter, in. (mm) 16-in (406mm); Feed drum not included with SPW configuration
Feed drum fingers Steel heavy-duty round 5/8-in (16mm) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual Chevron, retracting
Finger reach, in. (mm) 6-in (152mm)
Drum/auger reverse Base
Operating speed, rpm 195 rpm
Center clean out door Base
Header Height Sensing  
Type Electro-Hydraulic Base
Header height sensing on the ground Base
Header height sensing off the ground ---
Auxiliary Top Auger  
Type Optional; hydraulic drive
Dimensions  
Platform length, ft. (m) 27.9-ft (8.49m)
Overall operating depth, ft. (m) 7.9-ft (2.41m)
Transport width, field position, ft. (m) 26.5-ft (8.09m)
Transport width on wheel, less dividers, ft. (m) ---
Transport length, hitch extended, ft. (m) ---
Weight  
Approximate weight (slat reel), lb. (kg) ---
Approximate weight (pickup reel), lb. (kg) 6359 lb (2884kg) Combine Only; 5036 lb (2284kg) SPW Only
Approximate weight (with transport) lb (kg) ---
Approximate weight (optional 54-in. reel) lb (kg) 6556 lb (2974kg) Combine Only; 5234 lb (2374kg) SPW Only