John Deere 635D for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

CroppedImage525300-635Ddraper.jpg

635D

 

Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Performance features of the 635D include taller belt cleats, wider belts, and a larger, 16-inch feed drum. You can even add an optional auxiliary top auger to keep bushy crops moving into the feederhouse.

  • Windrowing capability with 600D Drapers
  • Double-cut knife system produces a cleaner cut
  • Cutterbar is closer to the ground
  • Stainless-steel feed floor
Model 635D
Cutterbar  
Type Straight line knife drive system
Length, ft. (m) 35.5 ft (10.82 m)
Knife drive Dual knife base
Knife speed 520 cycles/min
Cutterbar tilt Base hydraulic (9 degrees tilt max)
Pickup Reel  
Number of slats 6 Bat Poly Base
Fingers Nylon
Diameter, in. (mm) 42 in. (1067 mm)
Height control Hydraulic
Speed control Hydraulic
Reel lift, in. (mm) 13.0-in. (330-mm) cylinder stroke; 15.4-in. (391.5-mm) total range
Reel fore and aft, in. (mm) 14.1-in. (359-mm) cylinder stroke; 24.4-in. (620-mm) total range
Reel resume Base
Reel reverse Base
Operating speeds, rpm 6 rpm to 54 rpm
Operating speeds, rpm (54-in. reel) ---
Slat Reel  
Number of slats ---
Diameter, in. (mm) ---
Height control ---
Speed control ---
Operating speeds, rpm ---
Draper Belts  
Width, in. (mm) Side belts 40 in. (1016 mm); center belts 55 in. (1397 mm); Center belt not included with SPW configuration
Clean height, in. (mm) 1-in. (25.4-mm) cleats
Operating speed, ft./min. (m/min.) Side belts variable up to 735 fpm (223 m/min); center belts 695 fpm (212 m/min); Center belt not included with SPW configuration
Speed control Hydraulic from cab
Center belt reverse Base; Center belt not included with SPW configuration
Feed Drum  
Diameter, in. (mm) 16 in. (406 mm); Feed drum not included with SPW configuration
Feed drum fingers Heavy-duty round 5/8-in. (16-mm) diameter with breakaway notch and retainer
Number of fingers 18
Auger finger platform Dual chevron, re-tracking
Finger reach, in. (mm) 6 in. (152 mm)
Drum/auger reverse Base
Operating speed, rpm 195 rpm
Center clean out door Base
Header Height Sensing  
Type Electrohydraulic, base
Header height sensing on the ground Base
Header height sensing off the ground Base
Auxiliary Top Auger  
Type Optional, hydraulic drive
Dimensions  
Platform length, ft. (m) 37.9 ft (11.55 m)
Overall operating depth, ft. (m) 8.2 ft (2.5 m)
Transport width, field position, ft. (m) 37.5 ft (11.43 m)
Transport width on wheel, less dividers, ft. (m) 8.9 ft (2.71m)
Transport length, hitch extended, ft. (m) 45.4 ft (13.84 m)
Weight  
Approximate weight (slat reel), lb. (kg) ---
Approximate weight (pickup reel), lb. (kg) 7746 lb (3514kg) Combine Only; 6423 lb (2914kg) SPW Only
Approximate weight (with transport) lb (kg) 8136 lb (3690kg) Combine Only; 6813 lb (3091kg) SPW Only
Approximate weight (optional 54-in. reel) lb (kg) ---