John Deere AC2-CW5220H Welderator™ (Stationary)

John Deere Equipment » Agriculture » Home & Workshop » Welderator » Welderator™ » AC2-CW5220H Welderator™ (Stationary)

Double tap to zoom

 

Features

  • Industrial Honda OHV engine (Electric start, without battery and cables)
  • 3 year limited engine warranty

Generator Mode

  • AC current only
  • Selector switch set to idle down - engine will idle down when generator is not in use and tank pressure is 175 PSI
  • Switch is set to full throttle - engine will run full throttle continuously

Welder Mode

  • DC current only
  • Selector switch must be set to full throttle

Compressor Pump

  • Quality two stage compressor
  • Splash-lubricated cast iron crankcase
  • Durable stainless-steel braided discharge hose
  • Quality pilot valve unloader

Generator

  • Brush-type 2 pole 120V/240V alternator
  • Industrial 5000 max watt generator

Welder

  • 220 DCA arc welder
  • Amperage selection switch

Frame

  • Powder coated ASME coded 20-gallon receiver tank
  • 1/4-inch base plate to reduce vibration

Components

  • Regulator and two gauges for tank and outlet pressure
  • Manual drain valves for proper maintenance
  • 10-gallon fuel tank capacity

Specifications

Model/Part No. AC2-CW5220H
Engine  
Power Source Gasoline
Honda OHV 688cc
Rated Speed 3,600 RPM
Compressor  
CFM @ 175 PSI 29.0 (Equipped with 150-PSI maximum rated regulator)
Generator  
Max. AC Output 5000 watts
Rated AC Output 4500 watts
Welder  
Duty Cycle (10 min. run time) 220A @ 40%, 190A @ 60%, 150A @ 100%
DC Voltage 50-220A working range
Miscellaneous  
Measurements 47"L x 24"W x 50"H
Net Weight 803 lbs.