John Deere 225

Double tap to zoom

 

Features

  • Hitch can be set to meet disking needs
  • Choice of disk blades provided
  • Gang wrenches come as base equipment
  • One-piece welded mainframe

Specifications

Manufacturer John Deere
Model 225 Offset
Fold  
Type  Rigid  
Working widths  
Spacing option A  Disc spacing - 22.86 cm 
   9 in. 
Option 1  18 discs  
   2.11 m 
   6.92 ft, in. 
Option 2  20 discs  
   2.31 m 
   7.58 ft, in. 
Option 3  22 discs  
   2.54 m 
   8.33 ft, in. 
Option 4  24 discs  
   2.77 m 
   9.08 ft, in. 
Option 5  26 discs  
   3.0 m 
   9.83 ft, in. 
Option 6  28 discs  
   3.20 m 
   10.50 ft, in. 
Option 7  ---  
Option 8  ---  
Option 9  ---  
Option 10  ---  
Option 11  ---  
Option 12  ---  
Option 13  ---  
Spacing option B  ---  
Option 14  ---  
Option 15  ---  
Option 16  ---  
Option 17  ---  
Option 18  ---  
Option 19  ---  
Option 20  ---  
Option 21  ---  
Option 22  ---  
Spacing option C  ---  
Option 23  ---  
Option 24  ---  
Option 25  ---  
Option 26  ---  
Option 27  ---  
Transport width  
Spacing option A  229 mm 
   9 in. 
Option 1  ---  
Option 2  ---  
Option 3  ---  
Option 4  ---  
Option 5  ---  
Opton 6  ---  
Option 7  ---  
Option 8  ---  
Option 9  ---  
Option 10  ---  
Option 11  ---  
Option 12  ---  
Option 13  ---  
Spacing option B  ---  
Option 14  ---  
Option 15  ---  
Option 16  ---  
Option 17  ---  
Option 18  ---  
Option 19  ---  
Option 20  ---  
Option 21  ---  
Option 22  ---  
Spacing option C  ---  
Option 23  ---  
Option 24  ---  
Option 25  ---  
Option 26  ---  
Option 27  ---  
Transport height  
Spacing option A  ---  
Option 1  ---  
Option 2  ---  
Option 3  ---  
Option 4  ---  
Option 5  ---  
Option 6  ---  
Option 7  ---  
Option 8  ---  
Option 9  ---  
Option 10  ---  
Option 11  ---  
Option 12  ---  
Option 13  ---  
Spacing option B  ---  
Option 14  ---  
Option 15  ---  
Option 16  ---  
Option 17  ---  
Option 18  ---  
Option 19  ---  
Option 20  ---  
Option 21  ---  
Option 22  ---  
Spacing option C  ---  
Option 23  ---  
Option 24  ---  
Option 25  ---  
Option 26  ---  
Option 27  ---  
Weight per blade  
Spacing option A  ---  
Option 1  ---  
Option 2  ---  
Option 3  ---  
Option 4  ---  
Option 5  ---  
Option 6  ---  
Option 7  ---  
Option 8  ---  
Option 9  ---  
Option 10  ---  
Option 11  ---  
Option 12  ---  
Option 13  ---  
Spacing option B  ---  
Option 14  ---  
Option 15  ---  
Option 16  ---  
Option 17  ---  
Option 18  ---  
Option 19  ---  
Option 20  ---  
Option 21  ---  
Option 22  ---  
Spacing option C  ---  
Option 23  ---  
Option 24  ---  
Option 25  ---  
Option 26  ---  
Option 27  ---  
Operating speed  
Miles per hour  6.4 to 9.7 km/h 
   4 to 6 mph 
Power requirements  
Horsepower required  Power take-off - 29.8 to 74.6 kW 
   40 to 100 hp 
   Engine - 35.8 to 89.5 kW 
   48 to 120 hp 
   Light drawn - 18 discs 29.8, 20 discs 33.5, 22 discs 37.3, 24 discs 41.0, 26 discs 44.7, and 28 discs 48.5 kW 
   18 discs 40, 20 discs 45, 22 discs 50, 24 discs 55, 26 discs 60, and 28 discs 65 hp 
   Medium drawn - 18 discs 41.0, 20 discs 44.7, 22 discs 47.5, 24 discs 52.2, 26 discs 55.9, and 28 discs 59.7  
   18 discs 55, 20 discs 60, 22 discs 65, 24 discs 70, 26 discs 75, and 28 discs 80  
   Heavy drawn - 18 discs 52.2, 20 discs 55.9, 22 discs 59.7, 24 discs 63.4, 26 discs 67.1, and 28 discs 74.6  
   18 discs 70, 20 discs 75, 22 discs 80, 24 discs 85, 26 discs 90, and 28 discs 100  
Leveling options  
Option 1  Parallel-lift bar and 3-leaf spring for front-to-rear leveling and increased relative pressure on front or rear gangs  
Option 2  ---  
Depth control  
Option 1  Mechanical depth stops  
Option 2  ---  
Option 3  ---  
Hydraulic requirements  
Standard  1 selective control valve (SCV) required  
Option 1  ---  
Option 2  ---  
Option 3  ---  
Electrical requirements  
Standard  9-pin connector for warning lights  
Option 1  ---  
Option 2  ---  
Hitch  
Type  Combination hitch with right or left offset options  
Wing flex  
Up  ---  
Down  ---  
Frame  
Tubing  Structural steel - 4x4x3/406 mm 
   16 in. 
Underframe clearance  ---  
Gang  
Angle  Adjustable  
Front  25 to 48 degree (angle) 
Rear  25 to 48 degree (angle) 
Tubing  ---  
Front  Structural steel - 3x5x3/406 mm 
   16 in. 
Rear  Structural steel - 3x5x3/406 mm 
   16 in. 
Gang bolt  Round - 38 mm 
   1.5 in. 
Gang standard  Rigid nodular iron  
Welded spool diameter  ---  
Bearings  Triple-sealed ball bearings with wear guards (no lubrication needed unless grease fittings are installed)  
Scraper  Rigid  
Finishing blades  
Standard  ---  
Option 1  Spherical blade with scraper - 356 mm 
   14 in. 
Option 2  ---  
Option 3  ---  
Option 4  ---  
Middle breaker  Offset  
Blades  
Spacing  229 mm 
   9 in. 
Size  ---  
Option 1  Solid cone - 559 x 4 mm 
   22 x 0.157 in. 
Option 2  Solid cone or cutout cone, or a combination of a front cutout cone and a rear solid cone -  
   610 x 4.5 mm 
   24 x 0.177 in. 
Option 3  Solid spherical or cutout cone - 610 x 4.7 mm 
   24 x 0.187 in. 
Option 4  Solid cone or cutout cone - 610 x 6.5 mm 
   24 x 0.256 in. 
Wheels  
Mainframe wheels and tires  ---  
Option 1  4PR rib implement base wheel and tire option -  
   Two 15-5KB wheels with 6.70-15 in. 4PR rib implement tubeless tires (in base price)  
Option 2  Wheels less tires options -  
   Two 15-6 wheels less tires  
   Two 16-6 wheels less tires  
Option 3  6PR rib implement tubeless wheel and tire options -  
   Two 14-6KB wheels with 9.50-14 in. 6PR implement tubeless tires  
   Two 15-6KB wheels with 7.60-15 in. 6PR implement tubeless tires  
Option 4  6PR rib implement tubeless wheel and tire option -  
   Two wheels with 7.6-15 in. 8PR tires  
Wingframe wheels and tires  ---  
Option 1  At 152-cm (60-in.) wheel tread spacing, working width -  
   2.11 to 3.0 m 
   6.92 to 9.83 ft 
Option 2  At 203-cm (80-in.) wheel tread spacing, working width -  
   3.20 to 3.66 m 
   10.5 to 12.0 ft 
Option 3  ---  
Option 4  ---  
Stabilizer wheels  ---  
Option 1  ---  
Option 2  ---  
Harrows  
Option 1  ---  
Spike/tine  ---  
Rank spacing  ---  
Spike/tine spacing  ---  
Effective spacing  ---  
Spike/tine dimensions  ---  
Basket  ---  
Basket Diameter  ---  
Bar type  ---  
Bar size  ---  
Bearings  ---  
Adjustments  ---  
Option 2  ---  
Spike/tine  ---  
Rank spacing  ---  
Spike/tine spacing  ---  
Effective spacing  ---  
Spike/tine dimensions  ---  
Basket  ---  
Basket diameter  ---  
Bar type  ---  
Bar size  ---  
Bearings  ---  
Adjustments  ---  
Rear hitch  
Available  ---  
Tubing size  ---  
Telescoping  ---  
Tongue weight rating  ---  
GVW  ---  
Wiring harness for transport lights  ---  
Hydraulic hoses and couplers  ---  
Warranty  
Type  ---  
Additional features  
Option 1  ---  
Option 2  ---  
Option 3  ---  
Option 4  ---  
Option 5  ---  
Additional information  
Date collected