John Deere 1023E for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

CroppedImage525300-E-Series-1023E-2015.png

1023E

 

Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Powerful Final Tier 4-compliant diesel engine
  • New, easy-lift hood with dual gas-charged lift struts
  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
  • Easy-to-operate two speed hydrostatic transmission
Manufacturer John Deere
Model 1023E (2016)
Engine  
Family  EYDXL0.99NS2  
 FYDXL0.99NS2  
 GYDXL0.99NS2  
Manufacturer  Yanmar  
Engine model  3TNM74F-NCJT  
Engine power (gross)  16.5 kW 
   22.4 hp 
Power take-off (PTO) power  10.8 kW 
   14.5 hp 
Rated engine speed  3200 rpm 
Type  Diesel  
Injection pump type  Indirect Injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 0.993 L 
   3 / 60.6 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-In-Block  
Bore and stroke  74x77 mm 
   2.91 x 3.03 in. 
Compression ratio  23.5:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  49.2 Nm 
   36.3 lb-ft 
Fuel tank capacity  21.2 L 
   5.6 U.S. gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.2 kW 
   1.6 hp 
Fuel system  
Type  Indirect Injection  
Fuel consumption  5.3 L/hr 
   1.4 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc (left-hand pedal)  
Steering  Power  
Clutch, wet/dry  N/A  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  612 kg 
   1349 lb 
Rear  715 kg 
   1576 lb 
Creeper  No  
Cruise control  No  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open Center  
Pump rated output  24 L/min 
   6.3 gpm 
Steering  10.8 L/min 
   2.8 gpm 
Implement  13.2 L/min 
   3.5 gpm 
Pump type  Gear  
Maximum operating pressure  2150 psi 
Draft control sensing  Select Control  
Remote control valves available  Two  
3-point hitch  
Category  Limited Category 1  
Lift capacity, 24-in. behind link arms  309 kg 
   681 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
   Mid - 2100  
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  Electrohydraulic  
Fluid capacities  
Crankcase with filter  2.7 L 
   2.9 qt 
Transmission and hydraulic system  14 L 
   3.7 qt 
Final drive  
Type  Bull Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  Yes  
Type  Foldable  
Platform - flat/straddle  One-piece semi flat  
Gear shift location - console/floor  Left Hand Side  
Cab  
Compliance  NA  
Visibility  NA  
Air conditioning, temperature differential  NA  
Doors  NA  
Noise rating  NA  
Seat equipment  NA  
Dimensions  
Wheelbase  145 cm 
   57.1 in. 
Front axle clearance  195 mm 
   7.7 in. 
Turning radius with brakes  ---  
Turning radius without brakes  2.25 m 
   7.4 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  610 kg 
   1345 lb 
Tires  
Front  R4 - 18x8.5-10  
Rear  R4 - 26x12-12  
Front tread range  91.8 cm 
   36.1 in. 
Rear tread spacing  89.5 cm 
Miscellaneous  
Toolbox  Yes  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---