John Deere 5075E for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

CroppedImage525300-E-Series-Tractors-5075E-2015.png

5075E

 

Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • 2WD or MFWD
  • 12F/12R PowrReverser™ transmission available
  • Cab or Open Operator's station
Manufacturer John Deere
Model 5075E (2015)
Official Test 
Nebraska Test number Factory Observed
Engine 
Manufacturer John Deere PowerTech 3029
Engine family ---
Aspiration Turbocharged
Cylinders/Displacement, cu. in. (L) 2.9 L
3/179 cu in.
Cylinder Liners Wet Sleeved
Fuel tank capacity, US Gal. (L) (Open; Cab) ---
Standard 68.0; 82 L
18.0; 21.0 U.S. gal.
Optional ---
Underhood muffler Yes
Performance 
Advertised PTO hp (kW) @ Rated rpm 43 @ 2100 per SAE kW
57.6 @ 2100 per SAE PTO hp
Official PTO hp (kW) @ Rated rpm ---
@ Standard PTO @ Eng rpm ---
Maximum @ Eng rpm ---
Advertised Engine hp (kW) @ Rated speed 55.0 @ 2100 kW
75 @ 2100 engine hp
Max Unballast Drwbr hp (kW) @ Eng rpm ---
Maximum Torque (PTO) @ rpm, lb-ft (Nm) ---
Max Torque Rise (80% rtd spd) @ Eng rpm ---
Maximum Torque Rise % (PTO) @ Eng rpm ---
Fuel Use, U.S. gal./hr & hp hr/gal. at: 
PTO @ Rated Eng rpm ---
Standard PTO Speed @ Eng speed ---
Maximum PTO Power @ Eng rpm ---
Maximum Engine Power @ Eng rpm ---
Max Unballasted Drawbar Power @ Eng rpm ---
75% Load, Full Engine rpm (Unballasted) ---
75% Load @ Reduced rpm (Unballasted) ---
Transmission 
Std. Transmission; Forward/Reverse 9F/3R SyncShuttle
Opt. Transmission; Forward/Reverse 12F/12R PowrReverser
Reverser Optional
On-the-Go Shifting (Yes/No/Partial) Partial
Clutch; Wet/Dry Dry on 9F/3R SyncShuttle; Wet on 12F/12R PowrReverser
Creeper Option on 9F/3R transmission models
Power Take-Off (PTO) 
Standard Independent 540
Optional Independent 540E (12x12)
PTO Speeds @ Engine rpm 540 @ 2100 rpm
PTO Actuation Mechanical (lever on 9x3); Electrohydraulic with Wet Clutch(12x12)
Hydraulics 
Type Open Center
Pump Rated Output, GPM (L/min.) ---
Standard 68.9 L/min
18.2 gpm
Optional ---
Rated Flow @ One SCV, GPM (L/min.) 43.1 L/min
11.4 gpm
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, psi (kPa) ---
Maximum Hydraulic Power, hp (kW) ---
Hitch Draft Control Load Sense Type Mechanical
Remote Control Valves Available 1 (2 opt.)
Hitch Category (SAE Designation) 2 ; convertible to 1
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard 1448 kg
3192 lb
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing type Top Link
Joystick SCV control 2WD- FIK MFWD-Std
Final Drive 
Type Planetary
Differential controls Mechanical (Pedal)
Availability ---
Front No
Front & Rear No
Engage On-the-Go Rear Differential Lock Yes
Axle Type Flanged
Brakes, Type and Control Hydraulic Wet Disc
Operator Station 
Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic Foldable, 2-Post
Platform - Flat/Straddle Straddle
Gearshift Location - Console/Floor Floor, on the side
Cab ---
Doors LH door (RH door optional)
Platform - Flat/Straddle Straddle
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions 
Wheelbase, in. (mm) 2050 mm
80.7 in.
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) 480 mm
18.8 in.
Turning Radius w/Brakes, ft (m) 3.1 m
10.6 ft
Turning Radius w/o Brakes, ft (m) 3.5 m
11.6 ft
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---
MFWD Dimensions 
Wheelbase, in. (mm) 2050 mm
80.7 in.
Front Tread Range, in. (mm) ---
Front Axle Clearance, in. (mm) 340 mm
13.4 in.
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Limited Slip Differential ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab 2300; 2550 kg
5070; 5620 lb
4WD Dimensions 
Wheelbase, in. (mm) ---
Wheel Tread, Min. to Max. in. (mm) ---
Turning Radius w/o Brakes, ft (m) ---
Nebraska Test Unballasted w/Duals, lb (kg) ---
Unballasted Weight, lb (kg) ---
Standard Tires 
2WD ---
Front 7.5 - 16, R1
Rear 16.9 - 28, R1
MFWD ---
Front 9.5 - 24, R1
Rear 16.9 - 28, R1
4WD ---
Track widths ---
Miscellaneous 
Country of Manufacture Pune, India
Ballasting Restrictions, lb (kg) ---
*Notes ---