John Deere 2032R for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.




Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • 32 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch™ compatible
Manufacturer John Deere
Model 2032R (2016)
Family  EYDXL1.64L3N or FYDXL1.64L3N  
Manufacturer  Yanmar  
Engine model  3TNV88-BNJK1A  
Engine power (gross)  23.3 kW 
 31.6 hp 
 SAE J1995 rated power  
Power take-off (PTO) power  17.5 kW 
   23.5 hp 
Rated engine speed  2500 rpm 
Type  Direct injection  
Injection pump type  Direct Injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.642 L 
   3 / 100.2 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  88x90 mm 
   3.46x3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  85.4 Nm 
   63 lb-ft 
Fuel tank capacity  27 L 
   7.1 U.S. gal. 
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  Direct Injection  
Fuel consumption  5.3 L/hr 
   1.4 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  880 kg 
   1940 lb 
Rear  1600 kg 
   3528 lb 
Creeper  ---  
Cruise control  Standard  
Differential lock  Yes  
Drawbar maximum vertical load    
Type  Open center  
Pump rated output  39.6 L/min 
   10.5 gpm 
Steering  20.8 L/min 
   5.5 gpm 
Implement  18.8 L/min 
   5.0 gpm 
Pump type  Gear  
Maximum operating pressure  166.9 bar 
   2421 psi 
Draft control sensing  Position control  
Remote control valves available  Up to two  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  567 kg 
   1250 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
   Mid - 2100 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  3.6 L 
   4 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Bull Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  OSHA, SAE, ASAE  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Wheelbase  165.5 cm 
   65.2 in. 
Front axle clearance  279 mm 
   11 in. 
Turning radius with brakes  2.3 m 
   7.5 ft 
Turning radius without brakes  2.5 m 
   8.2 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  895 kg 
   1973 lb 
Front  Turf - 24x8.50-14  
   R4 - 25x8.5-12  
Rear  Turf - 36x14-15  
   R4 - 14-17.5  
Front tread range  93.5 cm 
   36.8 in. 
Rear tread spacing  104.9 cm 
   41.3 in. 
Toolbox  No  
Tilt steering wheel  ---  
12-V Outlet  Optional  
Date collected  ---