John Deere 6150R for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

CroppedImage525300-6150R.jpg

6150R

 

Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

  • Reliable John Deere 6.8L PowerTech™ Interim Tier 4 engine
  • Standard 20 Speed AutoQuad PLUS™ transmission or available Direct Drive or Infinitely Variable Transmission
  • ComfortView™ cab for all day comfort
Manufacturer John Deere
Model 6150R iT4
Official Test  
Nebraska Test number  Nebraska OECD Tractor Test 2060 - Summary 880  
Engine  
Manufacturer  John Deere PowerTech PVX  
Engine family  ---  
Aspiration  Single variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation  
Cylinders/Displacement, cu. in. (L)  6 / 6.8 L 
   6 / 415 cu in. 
Cylinder Liners  Wet sleeve  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  305 L 
   80.5 gal. 
Optional  N/A  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  90 @ 2100 per SAE kW 
   120 @ 2100 per SAE PTO hp 
Official PTO hp (kW) @ Rated rpm  92.70 @ 2100 kW 
   124.32 @ 2100 PTO hp 
@ Standard PTO @ Eng rpm  101.04 @ 2010 kW 
   135.50 @ 2010 PTO hp 
Maximum @ Eng rpm  107.89 @ 1700 kW 
   144.08 @ 1700 PTO hp 
Advertised Engine hp (kW) @ Rated speed  110 @ 2100 kW 
   150 @ 2100 engine hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  100.40 @ 1700 kW 
   134.64 @ 1700 hp 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  640 @ 1549 Nm 
   472 @ 1549 lb-ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  45.0 @ 1680 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  51.9 @ 1549 percent 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  29.80 & 3.11 @ 2100 U.S. gal./hr 
   7.87 & 15.79 @ 2100 gal. 
Standard PTO Speed @ Eng speed  30.95 & 3.26 @ 2010 U.S. gal./hr 
   8.18 & 16.57 @ 2010 gal. 
Maximum PTO Power @ Eng rpm  30.93 & 3.49 @ 1700 U.S. gal./hr 
   8.17 & 17.71 @ 1700 gal. 
Maximum Engine Power @ Eng rpm  29.75 & 2.93 @ 2100 U.S. gal./hr 
   7.86 & 14.88 @ 2100 gal. 
Max Unballasted Drawbar Power @ Eng rpm  30.81 & 3.26 @ 1700 U.S. gal./hr 
   8.14 & 16.54@ 1700 gal. 
75% Load, Full Engine rpm (Unballasted)  26.16 & 2.63 @ 2193 U.S. gal./hr 
   6.91 & 13.34 @ 2193 gal. 
75% Load @ Reduced rpm (Unballasted)  21.65 & 3.18 @ 13.79 U.S. gal./hr 
   5.72 & 16.13 @ 13.79 gal. 
Transmission  
Std. Transmission; Forward/Reverse  20-speed AutoQuad PLUS ECO transmission 40 km/h  
Opt. Transmission; Forward/Reverse  16-speed PowrQuad PLUS transmission, 20-speed AutoQuad PLUS ECO transmission 50 km/h, John Deere Infinitely Variable Transmission (IVT) 0.030 mph to 26 mph (0.050 km/h to 42 km/h), or John Deere IVT 0.030 mph to 31 mph (0.050 km/h to 50 km/h)  
Reverser  Left-hand base  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  Included with IVT  
Power Take-Off (PTO)  
Standard  1-3/8-in. 540/1000 reversible shaft  
Optional  1-3/8-in. 540/540E/1000 reversible shaft or 1-3/8-in. 540E/1000/1000E reversible shaft  
PTO Speeds @ Engine rpm  540 @ 1987 or 1000 @ 2010  
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  114 Advertised L/min 
   30.1 Advertised gpm 
Optional  N/A  
Rated Flow @ One SCV, GPM (L/min.)  116.1 L/min 
   30.7 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  116.5 L/min 
   30.8 gpm 
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  35.4 kW 
   47.5 hp 
Hitch Draft Control Load Sense Type  Electrohydraulic  
Remote Control Valves Available  3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optional  
Hitch Category (SAE Designation)  Category 3/3N  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  41.1 - 2 x 90 mm lift cylinders kg 
   9,244 - 2 x 90 mm lift cylinders lb 
Optional  N/A  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  N/A  
Optional  N/A  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  N/A  
Optional  N/A  
Sensing type  Electronic lower link  
Joystick SCV control  Mechanical or electronic  
Final Drive  
Type  Inboard planetary three pinion  
Differential controls  Electrohydraulic  
Availability  ---  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Rack and pinion  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  N/A  
Rigid - Foldable - Telescopic  N/A  
Platform - Flat/Straddle  N/A  
Gearshift Location - Console/Floor  N/A  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  71.1 dBA 
Seat Suspension System  ---  
2WD Dimensions  
Wheelbase, in. (mm)  2985 mm 
   117.51 in. 
Front Tread Range, in. (mm)  1485-2438 mm 
   58.5-96 in. 
Rear Tread Range, in. (mm)  1604-2302 mm 
   63.1-90.6 in. 
Minimum Rear Tread Setting, in. (mm)  TBD  
Front Axle Clearance, in. (mm)  469 mm 
   18.5 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2765 mm 
   108.9 in. 
Front Tread Range, in. (mm)  1714 to 2122 mm 
   67.5 to 83.5 in. 
Front Axle Clearance, in. (mm)  597 mm 
   23.5 in. 
Turning Radius w/Brakes, ft (m)  TBD  
Turning Radius w/o Brakes, ft (m)  6.96 m 
   22.10 ft 
Limited Slip Differential  Yes  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  6195 kg 
   13,657 lb 
4WD Dimensions  
Wheelbase, in. (mm)  N/A  
Wheel Tread, Min. to Max. in. (mm)  N/A  
Turning Radius w/o Brakes, ft (m)  N/A  
Nebraska Test Unballasted w/Duals, lb (kg)  N/A  
Unballasted Weight, lb (kg)  N/A  
Standard Tires  
2WD  ---  
Front  11.00-20 in. 
Rear  480/80R46  
MFWD  ---  
Front  380/85R30  
Rear  480/80R42  
4WD  N/A  
Track widths  N/A  
Miscellaneous  
Country of Manufacture  Waterloo, Iowa, United States  
Ballasting Restrictions, lb (kg)  Refer to Operator's Manual  
*Notes  Updated - 28 March 2015