John Deere 647 A
John Deere 647 A for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.
647 A
Get a Quote
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
QuikTrak Mowers
If you want more productivity, more maneuverability and better visibility look no further than the QuikTrak.
ENGINE
| Manufacturer | Kawasaki |
| Model No. | FH601 |
| Horsepower (gross) | 19 hp14.2 kW |
| Displacement | 41.2 cu in.675 cc |
| Cylinders | Two |
| Crankcase Capacity | W/filter - 2 U.S. gal. |
| Oil Filter | Full flow, replaceable |
| Lubrication | Full pressure |
| Cooling | Air |
| Air Cleaner | Heavy duty canister type |
| Pre-Cleaner | Foam |
FUEL SYSTEM
| Fuel Type | Regular unleaded gasoline |
| Fuel Consumption | --- |
| Fuel Tank Capacity | 6 U.S. gal.22.7 L |
| Fuel Tank Switch/Shut Off Valve | Yes |
ELECTRICAL SYSTEM
| Charge System | 13 amp |
| Battery Voltage | 12 V |
| Cold Cranking Amp | 340 CCA |
| Hour Meter | Yes |
| Operator Presence Starting System | Yes |
DRIVE TRAIN
| Hydraulic Pumps | Kanzaki DUP 10A |
| Wheel Motors | Parker Ross, 195 cc |
| Travel Speed | 8 mph |
| Forward | 0 - 8 infinite mph0 - 12.9 km |
| Reverse | 0 - 4 infinite mph0 - 6.43 km |
| Speed and Direction Control | Twin hand-controlled levers |
| Hydraulic Capacity | Hydraulic Tank Cap. 2.5 U.S. gal. |
| Hydraulic Oil Cooler | --- |
| Filter | Spin-on type |
TIRES
| Drive Tires | 20x10-10 turf |
| Rear Tires | --- |
| Load Rating | 4 PR |
BRAKES
| Dynamic Braking | Dual hand-controlled levers |
| Park Brake | Tire stop |
| Park Brake Actuation | Hand lever |
PTO
| Type | Warner Magstop |
| Drive | V-belt |
MOWER DECKS
| Available Widths | 48 in. |
| Deck construction | 7-Iron: one piece stamped steel |
| Deck thickness | 7 gauge stamped.177 in. |
| Discharge | Side |
| Height-of-Cut Range | 1.5 - 5.0 in. |
| Increments | 0.25 in. |
| Cutting Width | 48 in. |
BLADES
| Length | 17 (48 deck) in. |
| Thickness | 0.25 in. |
| Tip Speed | 18,000 fpm |
| Number | Three, blade - 1.5 in. |
WHEELS
| Caster Wheel Type | Rubber, pneumatic |
| Caster Wheel Size | 13x5-6 |
| Front Anti-Scalp Rollers | RH, center, LH |
| Rear Anti-Scalp Rollers | LH |
DIMENSIONS
| Length | 68 in. |
| Width | 62 in. |
| Height | 48 in. |
| Weight | 1014 lb |
