John Deere Z925A EFI PRO 54in MOD deck
John Deere Z925A EFI PRO 54in MOD deck for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.

Z925A EFI PRO 54in MOD deck
Get a Quote
Fields with asterisks* and highlighted red are required.
Please email our helpful staff with any questions or comments using the contact form.
Send to A Friend
Fields with asterisks* and highlighted red are required.
Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Z925A EFI 54-in. Mulch On Demand ZTrak Mower
The Z925A EFI PRO ZTrak is equipped with a brand new closed-loop electronically fuel injected 27-hp vertical-shaft, air-cooled Kohler® commercial-grade engine coupled with a 54-in. 7-Iron™ PRO Mulch On Demand™ deck.
This mower is the perfect machine for professional landscape contractors looking for ultimate durability, reliability, and productivity. Additionally, up to 20 percent fuel savings can be produced by the powerful, technologically-advanced engine. The heavy-duty castings and steel channel frame provide more strength than ever before.
Manufacturer | --- |
Model No. | ECV740EFI |
Horsepower (gross) | 24.6 HP @ 3600 RPM; Engine Manufacturer Certified Gross Power; Tested in accordance with SAE J1995 747cc |
Displacement | 747 cc |
Cylinders | Two |
Crankcase Capacity | 2.0 with filter U.S. qt |
Oil Filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Air |
Air Cleaner | Heavy-duty canister type w/safety |
Pre-Cleaner | Yes |
Fuel Type | Gas |
Fuel Consumption | 1.1 to 1.5 U.S. gal./hr under normal conditions, load, operation and dependent on horsepower |
Fuel Tank Capacity | 11.5 U.S. gal. |
Fuel Tank Switch/Shut Off Valve | Yes |
Charge System | 20 amp |
Battery Voltage | 12 V |
Cold Cranking Amp | 340 CCA |
Hour Meter | Standard, digital |
Operator Presence Starting System | Engage brake and turn key (Brake and Go) |
Hydraulic Pumps | Tuff Torq heavy-duty integrated piston pump |
Wheel Motors | Tuff Torq heavy-duty integrated piston wheel motor |
Travel Speed | --- |
Forward | 0-12 mph |
Reverse | 0-4.5 mph |
Speed and Direction Control | Twin levelrs |
Hydraulic Capacity | 5.9 U.S. qt |
Hydraulic Oil Cooler | --- |
Filter | Spin-on type |
Drive Tires | 24x12-12 |
Rear Tires | --- |
Load Rating | 4 PR |
Dynamic Braking | Twin levers |
Park Brake | Internal wet-disk integrated in the transmission |
Park Brake Actuation | Foot actuated pedal |
Type | Electro-magnetic (200 lb. ft.) |
Drive | V-belt |
Available Widths | 54 in. |
Deck construction | One-piece stamped steel |
Deck thickness | 7 gauge - 0.177 in. |
Discharge | Side |
Height-of-Cut Range | 1.5-5.0 in. |
Increments | 0.25 in. |
Cutting Width | 54 in. |
Length | 21 in. |
Thickness | 0.25 in. |
Tip Speed | Approximately 18,000 fpm |
Number | Three |
Caster Wheel Type | Semi-pneumatic flat-free |
Caster Wheel Size | 13x6.5-6 |
Front Anti-Scalp Rollers | RH, center, LH |
Rear Anti-Scalp Rollers | LH, RH,; double captured |
Length | 84 in. |
Width | With discharge chute: 69 in. |
Height | 73 in. with ROPS up, 47 in. with ROPS down |
Weight | Uncrated: 1304 lb |