John Deere Z960A PRO 60in deck for sale at Lawson Implement Co., Inc. Serving your new and used equipment needs from Goldthwaite and Hamilton, TX.


Z960A PRO 60in deck


Get a Quote Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send To A Friend Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Nothing less than the best zero turn mowers in the business 

No matter what you’re looking for in a commercial zero-turn mower, you’ll find it in the Z900 lineup.  Our c-channel frames have been rebalanced for superior weight distribution.

New transmissions for more efficient use of power. And improved reliability in the deck drive system. Accept nothing less: it is our mantra, our philosophy, and our measuring stick. And it’s what we put into each and every Z900. Once you sit on one, you’ll have it too.

ManufacturerJohn Deere
Model Z960A 60 in. Model Year 2012
Manufacturer ---
Model No. FX921V
Horsepower (gross) 31.0 HP @ 3600 RPM; engine Manufacturer Cerified Gross Power; Tested in accordance with SAE J1995 999cc
Displacement 999 cc
Cylinders Two
Crankcase Capacity 2.0 U.S. qt
Oil Filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air Cleaner Heavy duty canister type w/ safety
Pre-Cleaner Yes
Fuel System  
Fuel Type Gas
Fuel Consumption 1.1 U.S. gal/hr. to 1.5 U.S. gal./hr under normal conditions, load, operation, and dependent on horsepower
Fuel Tank Capacity 11.5 U.S. gal.
Fuel Tank Switch/Shut Off Valve Yes
Electrical System  
Charge System 20 amp
Battery Voltage 12 V
Cold Cranking Amp 340 CCA
Hour Meter Standard, digital
Operator Presence Starting System Engage brake and turn key (Brake and Go)
Drive Train  
Hydraulic Pumps Tuff Torq heavy-duty integrated piston pump
Wheel Motors Tuff Torq heavy-duty integrated piston wheel motor
Travel Speed ---
Forward 0-12 mph
Reverse 0-4.5 mph
Speed and Direction Control Twin levers
Hydraulic Capacity 2.9 U.S. qt
Hydraulic Oil Cooler ---
Filter Internal, replaceable
Drive Tires 24x12-12
Rear Tires ---
Load Rating 4 PR
Dynamic Braking Twin levers
Park Brake Internal wet-disk integrated in the transmission
Park Brake Actuation Foot actuated pedal
Type Electro-magnetic (225 lb. ft.)
Drive V-belt
Mower Decks  
Available Widths 60 in.
Deck construction One piece stamped steel
Deck thickness 7 gauge - 0.177 in.
Discharge Side discharge
Height-of-Cut Range 1.5 - 5.0 in.
Increments 0.25 in.
Cutting Width 60 in.
Length 25 in.
Thickness 0.25 in.
Tip Speed Approximately 18,000 fpm
Number Three
Caster Wheel Type Semi-pneumatic flat-free
Caster Wheel Size 13x6.5-6
Front Anti-Scalp Rollers RH, center, LH; double captured
Rear Anti-Scalp Rollers RH, center, LH; double captured
Length 84 in.
Width With discharge chute: 73 in.
Height 73 in. with ROPS up; 47 in. with ROPS down
Weight Uncrated: 1353 lb